AutoLatestTech Blogs in EnglishTips

MG Hector Petrol Battery Installation Tips – Which Battery is Best For MG Hector Petrol

The MG Hector is a popular SUV model produced by MG Motor, a British automotive company owned by SAIC Motor Corporation Limited, a Chinese automaker. It was launched in India in 2019 and quickly gained attention due to its features, spaciousness, and competitive pricing.

To install a battery in an MG Hector Petrol Car, You need to follow these steps:

  1. Step Out of the Car, Ensure that the engine is turned off and the keys are removed from the ignition.

  2. Open the hood of the car and Search the battery which is usually located on the right-hand side of the engine hood.

  3. Check the Wires, If its Connected Properly to the battery.

  4. Reach Out to the Professional Battery Dealer For Installation or If you are in any emergency situation and there is nobody near you, Then you can Follow below Steps with the Proper care.

  5. 5 Things You Should Know Before Buying INVERTER and BATTERY For HOME

  6. Use a wrench or socket set to remove the negative (-) terminal connector from the battery. Loosen the nut and then carefully lift the connector off the battery terminal. Make sure it doesn’t touch any metal parts of the car to prevent accidental sparking.

  7. Repeat the same process for the positive (+) terminal connector.

  8. Once both terminals are disconnected, locate the battery hold-down bracket or strap that secures the battery in place. Depending on the model, it may be secured by bolts or a simple strap.

  9. Remove the bolts or release the strap to free the battery from its position. Take note of how the battery was positioned before removal so that you can install the new one correctly.5 Things You Should Know Before Buying INVERTER and BATTERY For HOME

  10. Lift the old battery out of the engine bay and place it in a safe area away from children and pets. Batteries contain hazardous materials and should be disposed of properly at a recycling center.

  11. Take the new battery which is (80D23L or 90D23L) Model and compare its specifications (size, voltage, and capacity) with the old battery to ensure they match. It’s important to use the correct type of battery for your MG Hector Petrol. You can Buy the same battery of Amaron or Exide Make whichever available.MG Hector Petrol Battery Installation Tips

  12. Position the new battery in the engine bay, ensuring that it is aligned correctly with the battery tray.

  13. Reinstall the battery hold-down bracket or strap and tighten it securely to prevent the battery from moving.

  14. Connect the positive (+) terminal connector to the positive terminal of the battery and tighten the nut.

  15. Connect the negative (-) terminal connector to the negative terminal of the battery and tighten the nut.

  16. Double-check all the connections to make sure they are secure and tight.

  17. Close the hood of the car.

Congratulations! You have successfully installed a new battery in your MG Hector Petrol. Remember to dispose of the old battery properly and consider recycling it.

We are sharing the detaied video of Battery Installation in Mg Hector Petrol, You can watch it for better understanding:-

Leave a Reply

Your email address will not be published. Required fields are marked *